Raw Material for Cold Forming Screws: | |
---|---|
Carbon Steel | C10C, 17MNB3, 19MNB4, 20MNB4, 23MNB4, 30MNB4, 38B2, 42CRB4 |
Alloy Steel | 42CrMo4, 34CrNiMo6 |
Stainless Steel | A2, A4, 1.4301, 1.4404 |
Brass | CuZn37 |
Aluminum | AlMg3, AlSi12 |
Copper | Cu-DHP |
Raw Material for Turning and Milling Parts | |
---|---|
Alloy Steel | C40, C45, 42CrMo4, 20MnCr5, 34CrNiMo6, 16MnCr5, 25CrMo4, 20MnCr5 |
Brass | CW614N, CW508L, CW603N, CW727R, CuZn37, CuZn39Pb3, CuZn10 |
Aluminum | 6061, 7075, 2024, 5083, 1050, 2011, 2017, 5086 |
Stainless Steel | 304, 316ti, 321, 416, 430, 1.4404, 1.4435, 904L |
Automat Steel | C10E, C15E, 11SMn30, 9SMn28, 15SMn37 |
Heat Treatment for Metal Screws and Turned Parts |
---|
Case hardening (8.8 10.9 12.9 Carbonitriding) |
Quenching and tempering |
Nitriding |
Induction hardening |
Flame hardening |
Carbonitriding |
Tempering |
Surface hardening |
Gas nitrocarburizing |
Surface Treatment for Metal Screws and Turned Parts |
---|
Galvanizing |
Anodizing |
Phosphating |
Powder Coating |
Electropolishing |
Black Oxide |
Passivation |
Nickel Plating |
Zinc Plating |
Chrome Plating |
Geomet 321 |
Geomet 500 |
Geomet 430 |
Geomet PlusVlh |
Geoblack |
Dacrolub |
Geokote |
Magni 565 |
Molykote® 3400A |
Molykote® D-708 |
Zintek 200 |
Zintek 300B |
Inorganic Top Coatings |
Organic Top Coats |
Thread Locking for Screws |
---|
Tuflok 200 |
Tuflok 300 |
Tuflok 400 |
Precote 20 |
Precote 30 |
Precote 40 |
Precote 50 |